Skip to Content
    • Log in
    • Cart (0)
    • Checkout
    Menu
    • Home
    • About
    • Shop 
      • Sewing Patterns 
        • Folk Patterns
        • Vintage Patterns
        • PDF Patterns
        • Men's Patterns
        • Children's Patterns
      • Fabric 
        • Linen
        • Cotton
        • Silk
        • Wool
      • Sewing Supplies
      • Folkwear Clothing
    • Blog
    • Customer Gallery
    • Contact
    • Home
    • About
    • Shop 
      • Sewing Patterns 
        • Folk Patterns
        • Vintage Patterns
        • PDF Patterns
        • Men's Patterns
        • Children's Patterns
      • Fabric 
        • Linen
        • Cotton
        • Silk
        • Wool
      • Sewing Supplies
      • Folkwear Clothing
    • Blog
    • Customer Gallery
    • Contact
    • Home
    • About
    • Shop 
      • Sewing Patterns 
        • Folk Patterns
        • Vintage Patterns
        • PDF Patterns
        • Men's Patterns
        • Children's Patterns
      • Fabric 
        • Linen
        • Cotton
        • Silk
        • Wool
      • Sewing Supplies
      • Folkwear Clothing
    • Blog
    • Customer Gallery
    • Contact
    News

    How to Make Flat Felled Seams

    August 25, 2022 1 Comment on How to Make Flat Felled Seams

    Up close Photo of Flat-Felled Seam

    by Cynthia Anderson

    Like French seams, flat felled seams encase the raw edge of the seam allowance creating a strong and clean finish that prevents fraying. Flat-felled seams are a typically found on clothing for men, children, and sportswear because of the strength and durability of the seam construction. If you own a pair of jeans, they are most likely have flat felled seams.

    Depending on the look you want, flat felled seams can be made to appear on the right or wrong side of a garment.  This seam treatment is a bit easier to do with more structured fabrics that are medium or heavy weight, though some lightweight fabrics are good too. Regular polyester thread works well, but consider using a heavier weight thread such as Button Twist (or doubling the tread feed) for a distinctive top stitch. The texture created by a heavier thread will stand out. You could even pick a contrasting color for an even bolder look. For a stitch that blends in to the fabric, match the regular-weight thread to the fabric. . 

    For this demonstration I am using a blue cotton shirting without a visibly right and wrong side. I am also using a standard straight stitch presser foot. You can purchase a special "Felling or Lap Seam" foot, but a standard foot works just fine. You could also use an edge stitch foot or zipper foot which can keep your stitching very straight when top stitching.  I am using a regular weight polyester thread in white for each stitching line.

    Note: Keep in mind that in this demonstration the right side has one line of visible stitching and the wrong side has two lines of stitching

    To create flat-felled seams. 
    Pin and stitch on the seamline, right sides together, like you normally would. I am using Folkwear's standard 1/2" (13mm) seam allowance. Use the seam allowance specified for the pattern you are using.

     

    Step One to Making Flat-Felled Seams: fabric pinned right sides together
    Step One to Making Flat-Felled Seams: fabric stitched right sides together

     

    Trim one edge of the seam allowance to ¼”(6mm) or by at least half of the width of the seam allowance. I have trimmed to approximately 3/8" (10mm) due to the weight of the fabric.

    Step Two to Making Flat-Felled Seams: one edge of seam trimmed

     

    Turn the wider raw edge of the seam allowance under and press it over the trimmed edge, matching the raw edge to the first stitch line.

    Step Three to Making Flat-Felled Seams: wider edge turned under to stitch line and pressed
    Step Three to Making Flat-Felled Seams: Edge pressed before final stitching

     

    With the wrong side facing up, stitch close to the turned edge, keeping the stitching straight and even.

    Step Four to Making Flat-Felled Seams: Stitching close to turned seam edge

     

    The regular straight stitching seen on the wrong side of the garment.

    Step Four to Making Flat-Felled Seams: Seam edge stitched on wrong side
     
    The stitching as seen on the right side of the garment.
    Step Four to Making Flat-Felled Seams: edge stitched on right side view
    Learning how to make flat felled seams will not only give your work a more professional finish, but will create stronger seams. Flat-felled Seams are a useful and easy technique to have on hand. Practice with different weight fabrics, seam allowances, and top stitching thread weights to be ready for your next flat felled seam appropriate project.


    Tweet Share Pin It Email

    1 Response

    Carolyn Blake
    Carolyn Blake

    May 11, 2023

    I have been using this technique for my whole sewing life. I have had garments where the fabric wore out but the seams were sturdy and intact. Your technique is a tiny bit different from mine. I will gave yours a try. Thank you!

    Leave a comment


    Also in News

    The Sunset Wrap: A Customer's Perspective
    The Sunset Wrap: A Customer's Perspective

    July 08, 2025 5 Comments on How to Make Flat Felled Seams

    Continue Reading

    Floral 128 Russian Settlers' Dress with Ribboned Back
    Floral 128 Russian Settlers' Dress with Ribboned Back

    June 25, 2025

    Continue Reading

    A 128 Russian Settlers' Dress with Back Pleats
    A 128 Russian Settlers' Dress with Back Pleats

    June 16, 2025

    Continue Reading

    More Info
    • Patterns
    • Fabric
    • Blog
    • Stockists
    • Wholesale
    • Policies
    • Search
    Sign up for our newsletter

    Sign up to get the latest on sales, new releases and more…

    Contact Us

    info@folkwear.com

    P.O. Box 732, Fairview, NC 28730

    Office/Studio: 240 Clingman Ave Ext, Asheville, NC 28801

    828-628-2049


    © 2025 Folkwear. Powered by Shopify