News

By Cynthia Anderson

This is Day 1 of the sew along.  For Day 2, go here.

Today I am going to start a sew along for Cynthia's Cookie Apron.  This sew along will be two days, covering not only how to sew the apron, but all the tricks and tips for working with different fabrics and widths as well as options for finishing.  Today we select and cut fabric and sew on the pockets.  

Each day, I find myself slipping on this cross-back apron no matter what I intend on doing (not just baking cookies!) simply because I am addicted to so many handy pockets. Besides protecting your clothing with a really nice amount of coverage and adding an extra layer of warmth when it is cold out, this apron is as fun to wear as it is practical. If you are like me, you will make yourself an apron for gardening and dirty jobs, an apron for cooking, an apron for sewing and knitting, and an apron for house cleaning. And you can expect friends and strangers alike to want one too.

I decided to share this pattern through Folkwear, because I was asked "where did you get your apron" every time I wore it to the grocery store, hardware store, or the garden center. Yes, I often forget I am still in my apron when I go out. The practical charm of this apron seems to speak for itself.

This apron comes in a range of three sizes, Extra-Small/Small, Medium/Large, and Extra Large/2XL. Make it for yourself or make as a gift to someone special. Make it to liven up your holiday making or simply to enhance your everyday chores.

 Front and Back Views

Gathering Materials

Fabric Choices:  Any light to mid-weight woven fabric such as cotton and linen. Quilting cotton is a good choice as well. Sizes XS/SM will only fit on fabric 54” (127cm) or wider and MD/LG and XL/2XL will only fit on fabric 60” (150cm) or wider.  See below for tips on using narrower fabric.

If there was ever a garment just begging to be used as a canvas for creativity, aprons are it. Mix and match fabrics, add trims, ribbon, lace, buttons, snaps, hand and/or machine stitching, embroidery, cross-stitching, appliques, hand painting, and anything else you can think of. Of course, there is a simple beauty in a simple fabric with a touch of top stitching or not. You cannot go wrong with anything you are inspired to create.

Notions:  Thread; two ¾” (2cm) buttons for straps (optional).
Interfacing can be used for the facing, but not required depending on the weight of the fabric used. The straps can be interfaced and not the bib portion if you like. If using interfacing, ¼ yard (.23m) is required. 

 

CUTTING YOUR FABRIC: Sizing, Adjustments, and Considerations

There are some adjustments to consider before cutting the pattern from fabric.  You will first want to determine the size you want to make.  This pattern has a lot of room for each of the sizes.  You can go by the grade rule we have for it to get pretty close to the size you want.  The bust is probably the most important measurement for this pattern since there is lots more ease everywhere else.  But, remember the cross-back straps will also allow for some room as well.  If you fall between measurements, you can likely go with the smaller size.  If your measurements are larger than the pattern indicates, you can pull the center fold like away from the fold to add width to the pattern without other changes.

Also, before cutting into your fabric, predetermine the strap length required for comfortable wearing. If you would like the straps to be longer/shorter or to make them adjustable, add or subtract the length you desire to the ends of the strap portion of the pattern before cutting the fabric. Remember to add a seam allowance to the adjustment.

Hint: If you want to make your apron a bit wider, pull the center front edge of the apron body pattern piece away from the fold half the measurement needed.

Working with Fabric Width and Wide Pattern Pieces
This apron design provides nice coverage both front and back, but this makes the pattern pieces very wide. Due to this extra bit of roomy coverage, some fabric widths may be a bit too narrow for the pattern to be cut on the fold. This is not an uncommon occurrence when making garments with width and trying to use what you have on hand. Cutting on the straight-grain fold is ideal, but not always possible.

Depending on the width of your fabric and the size you wish to make, you may or may not need to cut on the crossgrain. Don't let less-than-ideal fabric width be a deterrent to making the larger sizes. Working with and around fabric width is an unavoidable aspect of the sewing experience. In this sew along I will share my thought process in working with a fabric I already had and making it work for this apron pattern, despite its narrower width.

Because my stash is a great place to shop for fabric, I decided on a mid-weight cotton seersucker stripe, which has a bit of holiday candy cane flair. Below, you can see how a size small fits on the fold (on grain) of this 52 inch (150cm) wide fabric. The fabric is a tad too narrow. Not to worry, there are options for working around this issue!

 

Cutting on the Cross-Grain
One Option would have been to cut my apron body on the fold with the fabric folded on the cross-grain. This would have forced the stripes to run horizontally on the body of the apron. Which would work, but was not what I wanted. However, this is a good project for cutting on the cross-grain, especially if using a solid fabric that is the same on both sides and does not have any directional concerns like nap. Luckily, lots of solid fabric fit this description.

Fabric that is stable can handle being cut on the cross-grain and is perfectly fine for this project. However, you do want to avoid cutting on the cross-grain if the cross-grain gives too much when gently pulled.

Cutting Using a Single Layer of Fabric
Another option is to open up the yardage, right side of the fabric facing up, so the fabric is in one layer and cut two sides of the apron making a center front seam. If you use the fabric in this way, it may be helpful to trace a second pattern for the apron body to make sure all the pattern pieces fit and lay out as they should.

Because I really wanted the stripes to run vertically, my only option was to open the fabric out flat for the positioning of the apron body pattern pieces. Because my fabric was the same on both sides and the pucker of the seersucker was not directional, it did not matter if the two apron body pattern pieces were not positioned going in the same direction.

Notice the Patch Pocket is positioned to be cut on the cross-grain and the Triangle Tissue Pocket is positioned to be cut on the straight-grain. Working with stripes is a great way to get creative.

Cutting two halves means you have a seam in the center front of the apron. Because, this method of laying out the pattern creates a center front seam, seam allowances are needed. You can add 1/2-inch (13mm) seam allowances to the center front of the apron when cutting out the pattern or simply pull the pattern away from the selvage edge 1/2-inch (13mm), as I ended up doing in the photo below.  The nature of the seersucker fabric and the aligning of the stripes makes the center seam hardly visible.

 

Note: If the fabric did have directional issues to consider, then I would have needed a bit more yardage, so both apron body pattern pieces could be flipped and positioned going in the same direction while lying flat. Or, be sure the fabric is wide enough to accommodate cutting on the fold.

Learning to factor in "fabric width" is a part of the sewing experience. Simply put, fabrics come in varying widths and every sewist eventually is faced with "how do I make this work?"

Since my fabric was not wide enough to cut the apron body on the fold, I cut two pieces with seam allowances added. In the photo below the two apron pieces are pined and stitched with right sides together, using the 1/2-inch (13mm) seam allowance. The seam is pressed open. The only difference between cutting on the fold verses cutting two pieces is the center seam.

Below is a close-up view of the center seam of the apron body with the right side facing up. The pin indicates the center seam. Because of the seersucker fabric pucker and the aligning of the stripes the seam is hard to see.

 

Laying Out the Apron Facing.  If cutting the apron on the fold, whether on the straight-grain or the cross-grain, then the facing should be cut in the same manner. If cutting the apron flat, you can either cut two facing pieces on grain, just like the apron body pieces, with added seam allowances, or cut the facing on the fold.

Even though, I cut the apron body laying flat with added seam allowances, I went ahead and cut the facing on the fold. Since the center front of the apron is sewn using a 1/2-inch (13mm) seam allowance, the apron is now the same width-wise as it would be if cut on the fold. So, the facing should fit perfectly.

Below the Facing and the Bib Pocket are cut one on the fold.

 

 

Cutting the Patch Pockets with Optional Tissue Pocket

Really deep pockets make an apron a great place for keeping things as you go about your daily "making and doing." The patch pockets on this apron design are not only deep, but they sit a bit high on the apron to prevent any objects from falling out when bending over. Another feature is the Tissue Pocket that really requires no explanation and is a nifty pocket for storing little things like rings, buttons, lip stick, as well as items that need their own specialized location like a tissue or hanky. Below are all the pocket pieces needed to get started. Notice how I switched the directions of the stripes to add a bit of whimsy and interest.

 

SEWING THE APRON

Patch Pocket
Fold under the long side edges and bottom edge of each of the rectangular Patch Pocket by ½” (13mm) and press.

Turn under the top edge of each patch pocket by ¼” (6mm), then again ¼” (6mm), and press. Stitch close to turned under edge.

 Repeat for other Patch Pocket.

Triangle Tissue Pocket
The Tissue Pocket is sewn to the Patch Pocket creating a small triangular pocket to keep small things like rings or a tissue handy.

Turn under and pin the two angled edges of each Tissue Pocket by ½” (13mm) and press.

 

Turn under and pin the top edge of each triangle by ¼” (6mm), then again ¼” (6mm) and press.

 Trim excess corners at each edge of triangle. Stitch close to turned under top edge.

 

Below is the right side view of the Triangle Tissue Pocket with all the edges stitched and trimmed. Notice the pin holding the bottom point of the triangle neatly in place before being added to the Patch Pocket.

 

Add the Triangle Tissue Pocket to the Patch Pocket
With wrong side of Triangle Tissue Pocket to right side of Patch Pocket, align the top edge of the triangle to the top edge of the patch pocket.

 The pins on the top of the Triangle Tissue Pocket are used to provide extra hold when stitching. The top edge is not sewn closed.

Pin and stitch along the angled sides close to the two angled edges. Leave the top of the triangle open creating a triangle-shaped pocket.

 Repeat adding other Triangle Tissue Pocket to the other Patch Pocket.

 

Bib Pocket
Turn under the two side edges and bottom edge of Bib Pocket by ½” (13mm) and press.

 

Turn under the top edge of bib pocket ¼” (6mm), then again ¼” (6mm) and press. Top stitch close to turned under edge.

Below is the wrong side of the bib pocket facing up, with the top edge turned under and stitched.

 

Adding Pockets to Apron
With right sides of apron facing up, place wrong side of Patch Pocket-Triangle Tissue Pocket Combo and Bib Pocket to apron front aligning with dots as indicated on the pattern. Pin and stitch each pocket close to the pocket edge on the side and bottom edges. Be sure to backstitch at open edges of pockets. Top edges are left open.

Note: When adding the Patch Pocket-Triangle Tissue Pocket Combo the pockets are positioned on the apron body at a slight angle when the apron is laying out flat. This is a trick that will allow the pockets to hang straight when worn. The pocket placement on the pattern might seem odd... but it is intentional.

 

 

Optional Pencil Pocket
To create a Pencil Pocket, stitch a vertical line slightly wider than a pencil through both layers of the Bib Pocket and Apron. You can make more than one pencil pocket or make additional pockets any way you like using this technique. I made a pocket for my spectacles the same way, by making the vertical stitching line a bit wider than my spectacles. Be sure to back stitch at the beginning and end if the vertical stitching line for stability.

Masking tape or removable tape makes a great stitching guide. Simply decide the width needed, being sure to leave a tad of room for an easy fit, then add tape as a guide, and stitch.

Below, the spectacle pocket is taped off on the left side of the bib and the pencil pocket is taped off on the right side of the bib pocket.

Using tape as a stitching guide is quick and easy. Just go slowly to avoid stitching into the tape. Notice the needle alignment to the tape guide below.

Stitching the on the left side of the tape, using the tape as a stitching guide to make the pencil pocket.

To make the spectacle pocket, the stitching is made on the right side of the tape.

 When stitching is complete, simply remove the tape.

Now, the Patch Pocket-Triangle Tissue Pocket Combo and Bib Pocket are sewn to the apron body and the extra pockets on the bib are done too. Pockets make a great apron even better. Plus, after a busy day of making and doing, if something goes missing... just look in your apron pockets.

 

Join me on Day Two of the Apron Sew Along, to learn how to add the facing, finish the straps, and hem the apron. This pattern will be featured throughout the month of December and just in time for making yourself or someone special charming gift.

 

 

 

 

I can't quite believe that the holidays are upon us.  We have again this year, compiled a Folkwear Holiday Gift Guide, divided into "gifts to make for others" and "gifts for the sewist".  It is always fun to go through our patterns and sewing supplies and think about gifting them. 

This year, we also have a brand new pattern (out tomorrow) that is just perfect for this gift guide - Cynthia's Cookie Apron.  Read more about it below!

Gifts To Make For Others

First, this lovely apron, Cynthia's Cookie Apron, is a cross-back apron with buttons to make it adjustable.  It has several pockets for all the things you might need to hold onto while in the kitchen (or garden or workshop).  It is attractive and extremely practical.  Make one or several for your friends and family.  I made a similar one last year for my mother and husband and the both loved them.  My mother has asked me repeatedly to make more of them so she could give them to her friends. And this apron comes with a cookie recipe too! This pattern will be available tomorrow!  

Old-fashioned Oven Mitts.  This is our newest free pattern!  Make a set of oven mitts for the baker in your life.  You can make these with pre-quilted fabric for quick and easy gifting or quilt the mitts yourself (not hard!).  

146 Six Bags From Around the World.  This pattern has a set of easy and quick to sew bags that are practical and fun.  Many are also great to make as the gift wrapping too!  You can also get the patterns individually if you just want to make one or two to gift (Japanese Carpenter's Bag is nice; also the Thai Shoulder Sling).  The Japanese Carpenter Bag kit is great to make one to give or to give the kit as a gift.

305 A Japanese Interior.  This pattern has lots of options for making home goods such as cushions or a futon mat.  

Our other free patterns.  We have a great carry everything bag, a cravat pattern, and a kimono ornament.  These are all great little gifts to make and give!

 

 

Gifts For The Sewist

For your crafty friends and family, this class on Mexican embroidery at ThreadWritten, using our 142 Old Mexico Dress (and embroidery) pattern is going to be so fun!  A really nice experiential gift that you could even do together!  

Sewing Tools.  We have a small set of really helpful sewing tools.  From buttonhole cutters to bias tape makers, these are small but critical tools great sewing.

Bundles.  We have several set of bundled patterns.  These bundles are perfect to gift someone who has interest in these areas.  You get a set of patterns at a discount and a nice little collection of similar patterns.  Gift the Edwardian Outfit Bundle or Maritime Bundle to a friend who's into vintage.  Or the Western wear bundle to a sewist who like costuming or western wear.  Or the Kid's Dress bundle to make the children in your life some really cute clothes.

Gift card.  We have several gift card options and these are great for a sewing friend or family member to get what they want in our shop!

And some of the favorite (for now) patterns of Folkwear staff - the ones they think would be great gifts.  

Esi's pick:  205 Gibson Girl Blouse.  A good base to make lots of fun blouses with many options for finishing (lace, collars, fabric, etc.).  And it would be a fun challenge.

 

Victoria's pick: 250 Hollywood Pants.  I love the knickers pattern - looks cute and comfy!

Cynthia's pick: 216 Schoolmistress Shirtwaist and Skirt.  The skirt is so flattering, fun, and easy to make.  It would be great in so many fabrics any time of year.

 

My pick: 231 Big Sky Riding Skirt.  I made a pair of these (still sewing on buttonholes) and they are fun and flattering and a great (but not too big) sewing challenge.  I love the pattern!

Pressing as you sew is as important as the stitches you put in the fabric.  A garment will simply not look or fit right if you wait until it is completely put together to press it; in fact, it probably won’t go together very well at all unless you press as you sew.  Refresh your pressing knowledge by reviewing these tips:

• Use a pressing cloth, so you won’t risk scorching the fabric or flattening the texture. Use a wool pressing cloth on wool fabrics, and cotton, muslin, or cheesecloth on other fabrics.  A small piece of white silk organza or cotton muslin is a great option too since you can see through it to the fabric you are pressing. 

• Use only the weight of the iron and a press-and-lift motion; over-pressing flattens the fabric and gives it a hard, brittle look. And don’t slide the iron back and forth.  This can stretch or distort the fabric grain.
• Vary the heat and pressure depending on the fabric; lightweight fabrics require a light touch and low heat.  Cotton and linen can take higher heat, but rayon and synthetic fabrics can scorch or melt with high heat.  It’s always wise to experiment with different heat and steam settings on swatches of your fabric before pressing garments components. 
• If your fabric is wrinkled or creased from being stored or washed, gently press it before you cut out the pattern.
• Don’t press over pins! Remove them or baste the seam first.  Use silk thread for basting, because you can press over it and it won’t leave an imprint.
• Press on the wrong side of the garment whenever you can; if you must press on the right side, always use a pressing cloth.  This will prevent having an imprint of the iron.
• Press in the direction of the fabric grain whenever you can, so you won’t distort the way the fabric drapes. On a bias garment, this means that the iron will be at a right angle to the seam you’re pressing.
• Press the seamline flat first, to set the stitches in the fabric; then press seam open. When a seam is to be pressed to one side, press it open first; this provides a more sharply defined edge than just pressing both seam allowances to one side.  Always press a stitched seam as directed, before stitching across it with another seam.

Press seam flat first.

Then press seam open.

• Clip/notch curved seams before pressing open. Stagger the clips in the seam allowances so you won’t weaken the fabric.  Use the point of the iron to press curved seams, so you won’t flatten the curve or create puckers in the fabric.
• Press heavily textured or embellished fabrics on a fluffy towel or heavily padded surface or a needle board, so you won’t flatten the texture. When pressing velvet or other pile fabrics, place fabric right side down on a needle board or piece of self-fabric.
• To keep the seam allowance edges from leaving an imprint on the right side of the garment, you can place strips of paper (cut from grocery bags or brown wrapping paper) under each seam allowance before pressing the seam open. Or, press the seam open over a narrow seam roll or curved piece of wood molding, so the weight of the iron doesn’t come in contact with the edges of the seam allowance.

• Use a tailor’s clapper or a brick wrapped in fabric to flatten pressed-open seams after steaming them well, and to sharpen the pressed edges of collars, lapels, belt carriers, and pockets. This is really helpful for heavy or thick fabrics.
• Set a chair or small table next to the ironing board to support large garments or extra fabric so they don’t hang off the ironing surface, because this can stretch or distort the fabric.

It is the third and final day of the 503 Poiret Cocoon Coat Sew Along and we will finish the coat by adding the lining, hemming the sleeves giving them a professional finish, and learn a couple of tricks using a length of chain to weight the hem and add some ribbon to create a hem finish that Poiret actually used himself.

Check out Day One and Day Two of the Sew Along to see what we have already done in making this fabulous coat!  Today we are going to add the lining and finish the edges.

Linings have a way of making a garment even more special and the the Poriet Cocoon Coat is the perfect piece for learning how to add a simple yet beautiful lining. Do not shy away from adding a lining just because it seems complicated. It is not. If you have avoided adding linings to your sewing project, give this one a try.

There are times when you may opt to not use a lining. If using a fabric like a brocade, cross weave, or damask that is equally beautiful on both sides, then consider going sans lining, and let the fabric show it's entire beauty.  However, linings are often a pleasure to wear. There is nothing more decadent than easily slipping in and out of a garment that feels and looks amazing. This coat design really does beg for a lining, because of the way it drapes and dips in the back, allowing for a beautiful lining to peek out. There is something intriguing about catching the glimpse of a lining that adds an unexpected twist to a garment.

Linings have the added benefit of easily and cleanly encasing the raw edges of all kinds of garments. However, adding a bound edge (bias strip) can allow for not only a clean finish but another excuse for a pop of color or for an interesting eye-catching effect. Of course, simply finishing the hem with a turned under edged finished is fine too if you are not using a lining.

I will be adding a ribbon detail to the hem of the coat.  The ribbon serves a functional purpose as well as adding a finishing detail. Adding ribbon to a turned edge to finish the hem works well too. Simply stitch a ribbon to the raw edge of the hem and hand stitch to the lining.

Note: Use the 1/2-inch (13mm) seam allowance for turning the hem edges on this coat. Using a wider hem with not allow the fabric to lay flat along the curves.

 

Preparing the Coat and the Lining

Inspect the raw edges of the coat and lining before assembling them. Be sure to clean up any stray threads. Check to be sure the dart points have been tied off.

Clip the seam allowance along the curve of each sleeve and trim the sleeve seam allowances by approximately half. Depending on the fabric, simply make a clean trim or use pinking sheers. Clipping and trim the excess seam allowance will allow the sleeve seam fabric to release as intended. Press the seam allowances open or towards the back of the coat.

 Repeat doing the same for the lining. Because my lining fabric is delicate I trimmed the seam allowance using a straight cut.

Pining the Lining to the Coat

With right sides together, line up the coat body with the lining, matching the notches and the seams allowances. Go ahead and slip the sleeve lining into the coat sleeves just ensure they do not accidentally get caught in the stitching.

Once you start matching the notches, you may need to to remove the pins and realign, which is the kind of adjustment you should expect to make with a garment with long curved shaped edges. I found this to be the case for me between notches 8 and 9.

Even though the bottom hem between both notch 9’s is not stitched for turning purposes, align and pin anyway, to ensure correct alignment. This may prove beneficial when using a slippery fabric like silk which can wiggle around.

Hint: Remember to pin within the seam allowance if using delicate fabrics, because pins often leave visible pin holes on silk and velvet. Use more pins to ensure all stays put if using slippery fabrics.

Tip: When machine stitching layers of fabric, especially if a slippery fabric is one of the layers, it helps for the stable fabric to lay on the feed dogs of the sewing machine. This makes sense when linings are often slippery. If both fabric layers are slippery, then using a removable or tare-away stabilizing material is highly recommended. Practice with a sample of both slippery layers of fabric sandwiched between a top and bottom pieces of stabilizing material to see how beautifully it helps.

Tip: Use a new sharp needle and stitching slowly will yield the best results.

Adding a Lining WITHOUT a Piped Edge Neckband:
Stitch the coat body and lining together as you normally would on the 1/2inch seam allowance. Begin with a back-stitch at one of notches labeled 9 at the bottom hem, stitching around the entire outer edge of the coat, ending the stitching at the second notch 9 with a back-stitch. Remember do not to stitch up the seam allowance between the notches labeled 9. There should be a gap or opening at the very bottom of the hem, which will allow for turning the coat and lining right side out.

Carefully press the seam allowances towards the lining.

Tip: If you are not accustomed to using a ironing cloth, consider investing in an inexpensive 1/2-yard (46cm) of silk organza in white or cream. Keeping an ironing cloth handy is an undervalued and sometimes life saver of a tool that helps to prevent damaging or scorching fine or delicate fabrics. The sheer quality of using either white or cream silk organza, will allow you to see through to your project while pressing. Even with the organza folded, creating a double layer, will allow you to see through to your work well enough.

Press the 1/2 inch (13mm) seam allowance under in the open hem area (between the 9 notches) for the coat body (and the lining to the wrong side). This step will provide you with a clean and correct turned under edge ahead of time for finishing the hem by hand.

 

Now, turn the coat right side out and press slightly rolling the coat edge in towards the lining.

Adding a Lining WITH a Piped Edge Neckband:
If using piping, first stitch main fabric and lining together at the collar with a machine-baste stitch. Then make a second pass of stitching using a zipper foot to allow you to get close to the piping on the neckband for a snug finish. Refer to the photos in Adding a Lining WITHOUT a Piped Edge Neckband (above).  

Begin stitching at one of notches labeled 9 at the bottom hem, using a regular presser foot to baste the layers together along the 1/2 inch (13mm) seam allowance, stitching around the entire outer edge of the coat, ending the basting at the second notch 9. Since we are basting back-stitching is not necessary. Remember not to stitch up the seam allowance between the notches labeled 9. There should be a gap or opening at the very bottom of the hem, which will allow for turning the coat and lining right side out.

For the final stitching, change to a zipper foot, to allow you to stitch close to the piping.

Note: Because the piping is sandwiched between the lining, and the neckband, plus the coat fabric, you will not be able to see the edge of the piping when stitching close to the piping with the zipper foot. This why keeping everything properly aligned on the 1/2 inch (13mm) seam allowance is important.

Hint: Hand baste close to the piping to help create a guideline for the final stitching with the zipper foot if you feel the need.

Sewing blindly with piping, is a bit tricky and basting (whether by hand or on the machine) allows for a first pass that can be then be adjusted when stitching again with assistance of the zipper foot. If you have a mishap, don’t worry. If the piping does get caught in the stitching, the needle can be moved away from the piping and you can re-stitch. If the stitching is not close enough to the piping, then the needle can be moved closer and re-stitch. Once the correct stitching is made, then the incorrect stitching can then be removed.

Take your time stitching around the angled bottom edges of the neckband. Check to be sure the lining and the coat align properly, look for puckering or any caught stitching that may have accidentally occurred. Once again, if the first pass is not perfect re-stitch where needed. Remember, sewing in sections is perfectly acceptable. You can see by my stitching below, how I had to adjust my positioning to make the stitching align close to the piping.

 

Carefully press the seam allowances to wards the lining.

Press the 1/2 inch (13mm) seam allowance under in the open hem area for the coat body and the lining to the wrong side. This step will provide you with a clean and correct turn under edge ahead of time for finishing the hem by hand.

Now, Turn the coat right side out and press slightly rolling the coat edge in towards the lining.

Adding a Decorative Ribbon to the Hem

This is an optional step, but one you should consider, because it can serve a functional purpose as well as adding a finishing detail. Depending on the drape of the lining fabric, and because of the cut of the bottom of the coat, the lining can sometimes fall away from the bottom edge. For this reason the ribbon helps to support the lining and provides a stable place to add a few hand stitches to tack the lining to the coat. If after trying on your coat you find that your fabric does this, hand stitch the inner edge of the ribbon through all the layers, taking tiny invisible stitches through to the outer layer.

Hint: Ribbon wider than 1 inch (2.5cm) may be tricky to get to lay flat along the curves of the coat, so we recommend a ribbon less than 1" wide.  The weight of the ribbon is also be a factor. Thick or stiff ribbon generally is not as pliable and light-weight ribbon. For this reason grosgrain ribbon is not recommended. Bias tape or bias ribbon can be used, as well Petersham. I am using a 1-1/2 inch (3.8cm ) silk bias ribbon from Hannah Silks. Even though my ribbon is a bit wide it lays nicely along the curved edge of the hem without problem.

The ribbon can be added when finishing a turned edge too.

Note: Hand wash and air dry your ribbon before using. Not all ribbon should be laundered. Pay attention when you purchase your ribbon if it can be laundered. Press ribbon on low heat to ready for applying.

The instructions tell you to begin at the center back of the lining hem with a slight overlap, lay the ribbon on the seamed edge of the lining with the edge of the ribbon along the seam line. Pin or baste the ribbon in place around the inside edge of the entire coat, but only to the lining and seam allowances (not the coat body fabric). At the center back hem, overlap the ends of the ribbon, folding under the raw edges to create a finished overlap.

Because I do not have enough ribbon to go all the way around the inside of the coat, I decided to only apply the ribbon running along the bottom of the hem. I begin and end the ribbon close to the bottom edge of the neckband. For this reason I did not start with overlapping the ribbon at the center back.

 The idea in positioning the ribbon, is to only align and pin the bottom edge of the ribbon to the lining and the seam allowance underneath, while not catching the coat fabric in the pinning. Place your finger between the coat fabric and the seam allowance so you can feel the pin catch the seam allowance. If you are not sure, go ahead and pin the lining and the coat together at the outer edge and then place your fingers between the the lining and the coat fabric, then it will make sense. Notice the positioning on my fingers on the left hand.

 

See my thumb helping align and hold the ribbon to the lining and seam allowance underneath.

This is what the inside should look like ( the seam allowance between the lining and coat body fabric), with the ribbon pined to the lining and the seam allowance. You want to stitch the bottom edge of the ribbon to the seam allowance to provide to give it extra strength and stability.

 

Reaching between the outer fabric and the lining, hand stitch the ribbon to the lining and seam allowances along the outer edge first.

OR, I chose to machine stitch the bottom edge of the ribbon to the lining at the stitching line. I had to maneuver my work under the presser foot being careful that the bunched up fabric did not get caught in the stitching by accident. I took my time, sewing slowly, adjusting the fabric as I went.

 

Then using a steam iron, steam the ribbon as necessary to lay nicely along the curve of the coat hem edge. Stitch the inner (top) edge of the ribbon to the lining only. The bias silk ribbon I used rounded the curves without needing to use a steam iron. Pin ribbon to the lining and hand stitch in place.

Hint: In order to only pin the ribbon to the lining, I put a French curve or something flat with smooth edges between the lining and coat layer to help with pining. This helps to avoid catching the coat body fabric in the pining. Look closely at the photo below and you can see the French curve sandwiched between the coat body and the sheer lining.

 

 

Adding the Optional Weighted Chain

The hem of the Poiret Cocoon Coat will drape and hang even more beautifully if weighted. This is not an uncommon finishing hemming technique, but one often forgotten about. The pattern calls for a 24-inch (61cm) of chain, which can be purchased at any craft shop that sells jewelry supplies. The weight of chain should correspond to the weigh of the fabric that needs weighting. Just about any necklace or bracelet weight will work for light to mid-weight fabrics. Avoid a chain that is large enough to look lumpy when laying in the fold of the hem.

At the center back of the coat body hem opening, insert the chain weight into the fold of the pressed seam allowance, centering the chain on the center back seam.

Tip: Use a few tiny widely spaced (2-inches (5cm)) of hand stitches along the length of chain to secure and hold the chain in place.

Pin and hand stitch the seam allowances at the bottom edge of the ribbon using tiny stitching. Pin the pressed edge of the lining slightly above the pressed folded edge of the coat. Hand stitch the lining to the coat along the bottom edge of the ribbon. Catch the seam allowance of the coat hem and and a small amount of the ribbon/lining fabric, while avoiding catching the outer coat fabric in the stitching.

Finishing the Sleeve Hems

Learning to properly hem sleeves is a tailoring technique that can be used on any garment with lined sleeves. This techniques holds the lining in place and keeps it from being visible at the edge of the cuff, creating a lovely finish.

Turn and press the sleeve hems of both coat and lining to wrong side on the 1/2 inch (13mm). Apply the ribbon to the pressed (right side) edge of the lining, beginning and ending the ribbon with an overlap at the seam. Stitch the ribbon to the lining along both edges of the ribbon. You can do this by hand, but I had not problem using the sewing machine.

With the ribbon edge of the lining slightly above the folded raw edge of the coat sleeve, hand stitch the lining to the coat along the edge of the ribbon.

Adding the Button or Frog Closure

The loop-mate for the button was added in the last step on Day Two of the Sew Along. If using a button, sew it to the wearer’s left side of the coat as marked on the pattern piece. It is ok if you need to adjust the button placement to ensure it aligns with the button-loop... I did. Be sure the button slips smoothly through the loop and is secure at the same time. When adding the button, stitch through all the layers for a strong hold.

Tip: When sewing buttons to fabric with multiple or thick layers try using a heavier weight thread sometimes referred to as button twist.

If using a frog closure, add the ball side to the wearer’s left side of the coat front, as marked on the pattern for positioning. Sew the loop side of the frog at the point of the neckband as indicated on the pattern, adjusting if needed to make the frogs fit securely.

 

Note: Whether using a button or frog closure be sure the front overlap of the coat edge is aligned straight up and down, and not crooked.

For an extra bit of closure security, you may want to add a snap or add ties to the opposite end of the neckband and the corresponding point on the lining to keep the underlap in place.

Often when I remake a design made by someone who actually made history, I wonder if the inspiration I had in making the garment some how got back to the originator? If so, I hope Paul Poiret where ever he may be, took pride in knowing that his iconic Cocoon Coat, is still being made and enjoyed by sewists. Make your  own coat wearing history using the Folkwear 503 Poiret Cocoon Pattern soon!

 

 

 

 

Join the talented Sarah Pedlow of Threadwritten Textiles for a virtual embroidery workshop concentrating on stitches and designs for the 142 Old Mexico Dress pattern. This workshop takes place on January 22, 2022, and registration is open now. Save your space and have something to look forward to in the new year!  

Learn more about the workshop and register here.  The embroidery pattern is included with your registration.

Get the 142 Old Mexico Dress Pattern here.

 

 

 

Watch a video about how to cut the yoke from this pattern

This is day TWO

For day ONE click here

To learn how to make the piping, click here

 

by Cynthia Anderson

I hope, you are pleased with the ease and simplicity in how Folkwear's 503 Poiret’s Cocoon Coat Pattern has come together so far. Check out day one of the sew along here.

Today, in Day Two of the 503 Poiret Cocoon Coat Sew Along, we will make the neckband or collar and attach it to the coat. You can read a separate blog post on how to make and use piping here. We will also add a button and loop closure as a final detail. After today, we have one more day of the sew along where we will finish the lining and add the trim.

Sewing often requires substitution or adjustments from the original plan.  This is where flexibility can benefit your sewing enjoyment. In this sew along I decided to use trim instead of piping, because I wanted to try it and it was in my stash. I will talk about my experience using the trim in case you decide to do the same, but using piping will be very much the same experience. 

Some people use fur (or faux fur) for the collar on this coat. If using fur, the collar does not need trim or piping, but edges should be finished if needed to prevent raveling.

Cutting Out the Neckband
If you have not done so already already, cut out the neck band.  Cut the Neckband Pattern Pieces B according to the pattern instructions, being sure to flip one of the pieces to create two neckband pieces that are a mirrored image of each other, as seen below. Transfer any markings and notches too.

If your fabric has a nap or pile like the velvet corduroy I am using (in the photo above), be sure the nap or pile goes in the same direction. Remember, the neckband is a focal point.

Add Interfacing
After cutting out the neckband, add a woven interfacing cut from the same collar pattern piece, to the wrong side of each neckband pieces. The interfacing will add structure and strength to the neckband fabric and neckline once it is sewn to the coat. Baste the layers together along the 1/2 inch (13mm) seam allowance. I made this baste line using a long (no.4) stitch on my sewing machine.  Sometimes the word baste can mean hand baste stitching to some sewist, which is perfectly fine. But in this case the 1/2 inch (13mm) stitch line will be used as a guide for aligning the piping or trim, so take care to stitch it with accuracy using a sewing machine.  This basting line also helps to ensure that the bias cut neckband does not become stretched out of shape when applying the piping.

Tip: Use a thread color that is easy to see on the interfacing side of the neckband when stitching the 1/2 inch (13mm) seam allowance guideline. This stitch line will be used for aligning the piping or trim.  For example, I used black thread for the top and bobbin thread that matched my neckband fabric and also showed up on the white interfacing. If I had used black colored interfacing I might have used a gray thread in the bobbin to make it was easier to see.

Constructing the Neckband
With right sides together, pin and stitch the Neckband Pattern Pieces B along the center back using the 1/2 inch (13mm) seam allowance, matching the notch. Be sure to back stitch at the beginning and ending of the stitching. Press the seam allowances open.

Hint: If using a fabric such as velvet (as I am) or corduroy do not press with an iron. Use your fingers to press and mold the fabric the best you can, or press on a needle board or terry cloth towel from the back side of the fabric. Using an iron on the top can scar and damage fabric with nap or pile.  

Important Note: Whether you use piping or not, the outer edges of the neck band for this coat are finished before it is applied to the coat body. In each case the edges of the neckband are folded under to the wrong side to create a clean finished edge before being sewn on.

To make piping, see our blog post, Making Piping Basics.

Thoughts on Using Trim Instead of Piping
I used a pre-made trim instead of piping to edge my collar. This trim is more like a grosgrain ribbon with a tiny rounded edge that looks like corded piping. The grosgrain part makes it a bit stiffer and it may be a bit wide, but I made it work.

The instructions recommend starting at center back of collar, pinning and then basting the piping in place. Instead, I found it helpful to give myself enough piping length, starting at the angled points to be sure they worked well first. 

It took a little trial and error to determine how much of the trim width would work so the corners would look nice. This was in part due to the thickness of the piping and the sharpness of the corners. I had to come to peace that the trim I was using was not going to allow for defined corners, but the results are perfectly acceptable.  

Hence, this is a perfect example of why lighter weight fabrics work better when applied to corners. While determined to use the trim I had, my corners are more rounded, but lovely just the same.

Hint: If you are a seasoned piping master then feel free to align, pin, and stitch your piping in one go. If you are like me and only pipe occasionally, there is no shame in working in sections.

Piping and corners can be fiddly. If you have trouble stitching the corners on the sewing machine, you should hand stitch to make the corners look more sharp.

Adding the Piping to the Neckband

Note: Even though I am using trim edging I will refer to it as piping.

The idea behind adding piping is for the covered cord edge to just peek out of the seam allowance creating a beautiful finished edge detail. Adding piping is not difficult but it does take time to align accurately. 

Using the pattern piece, mark the notches and squares on the piping to help with accuracy of fitting the piping to the neckband.

Be sure the piping is oriented correctly; the finished corded edge of the piping faces towards the center of the neckband. The raw edge of the piping runs parallel to the raw edge of the neckband edge.  The extra piping will overlap at the center back of the neckband.

Use the 1/2 inch (13mm) basting line as an aligning guide. The idea is to align the stitch line on the piping to the 1/2 inch (13mm) seam allowance.  Align by sticking a pin straight through the underneath, or wrong side, on the basting line and align the piping on top. With the pins still in place, use additional pins to secure everything in place and ready for machine sewing. Remove the original pins used for alignment or use them as well.

Align and pin the bottom edge of the piping at the corner points, matching the marks you made on the piping with the notches, squares, and bottom points on the neckband. Clip the piping seam allowance as necessary at the angles and points to allow it to bend around the corners smoothly.

 

Tip: You can use a bit of Fray Check if you fabric starts to fray too much with just for corners and angles.  

After going all the way around the neckband in this manner you will end where you began… at the center back. On the wrong side at the center back, overlap and cross the piping exactly, leaving extending tails into the seam allowance as seen below.

Look closely to see how the piping overlaps at the center back of the right side of the neckband below.

Hint: Do not feel you have to sew the piping on with one continuous stitch line. I find it easier to stitch in sections. Stitch the long sections, then sew the points and angles at the bottom edge or the other way around. Often the best way is the way that feels right to you and the materials you are working with.

Hand baste or machine baste the piping to the neckband. Then make a final stitch using a zipper foot on the sewing machine. Sew along the previous stitched seams, which should be on the 1/2 inch (13mm) seam allowance for Folkwear patterns.

Tip: Not all piping is created equal and can be made in varying widths. If the piping is wider than the seam allowance of your project, just trim the excess away once you are sure you have everything stitched with proper alignment.

At the bottom points of the neckband, clip diagonally to the stitching line through the seam allowance of the piping and neckband to release the fabric so it will lay flat. Don't clip the stitching line.  Sorry I failed to take a photo of this step.

With the exception of the long notched edge, fold the other edges under at the seam allowance to the wrong side and press.  Hand baste the folded-under edges to the interfacing to hold it flat if necessary. Be sure not to catch the neckband fabric in the stitching. Because the trim I am using was a bit stiff, I decided it would benefit from hand basting.

 

The piping should just stick out from the seam allowance as seen in the photo below.

Note: If the piping is sticking out too much from the edge of the neckband seam stitching, this may be due to not aligning the piping correctly or not stitching close enough to the cording when making the piping. Depending on the severity of the gap this can sometimes be remedied by re-stitching, moving the needle closer to the corded edge.

If you are not using a piped edge, press the turned under edge being sure the seam allowance stitching line is not visible and the edges are clean and uniform.

Attach the Neckband to the Coat
Place the wrong side of the neckband to the right side of the coat body, aligning the seam allowances at the center back, matching the notches, square to seam, and dot to dart. Pin in place around all edges.

The pattern instructions recommend hand basting or machine basting all the layers together along the stitch line of the notched edge. I machine stitched as normal.

Working with right sides of the coat and neckband facing up, pin the unsewn edge of the neckband to the coat front.  Make sure the neckband lays nice and flat to the coat body.

The seam allowances should already be turned under (whether using piping or not). Pin and hand baste the neckband to the coat body using a long running stitch to hold everything in place.

If you are not using piping, neatly hand whip stitch the neckband to the coat along the long un-notched edge and the angled bottom edges. Try to keep your hand stitching small and uniform, stitching just at the edge of the neckband and catching a small amount of the coat fabric with each stitch.

If using piping, be sure the bottom of the neckband lays nice and flat and double check that all edges are turned under.

Once the neckband is secured and ready to go, align your sewing machine needle and stitch in the “ditch” between the piping and the neckband to secure. I found it easier to sew one side of the neckband at a time, by starting at the center back of the collar, stitching slowly along the long edge and then around the angled edges at the bottom. Finish with a back stitch at the seam allowance at the end of the neckband edge.

Repeat on the other side of the neckband.

 

Now the collar is applied and stitched down, you can add a closure.

The Closure

Because of the simple elegance of this coat design and in staying true to Poiret’s aesthetic I am using the button and loop closure suggested in the pattern instructions. Other closures are acceptable, but keep in mind the look and feel of your coat. The pattern also suggests using a frog closure, which can be hand made or pre-made. (Stay tuned for Day Three of the Sew Along for the frog closure).

You can think of the closure like jewelry and make the closure a special final touch. If you are going for a more casual coat, make the closure look like it was part of the design plan. Whether simple or eye-catching, an inspired closure will make your coat sing.

I have chosen to use a button from my stash. It is not quiet as large as the button size suggested in the pattern, but I am hoping the special-ness of this Czech-glass button will make up for any discrepancy in size. The button needs a loop and all that is needed is a scrap of left over piping fabric. Since I opted to not make piping I am using a scrap of the fabric used for the coat body.

Making the loop is simple, use a bias rectangle measuring 1-1/2 inches (3.8cm) by 3-1/2 inches (8.9cm).

(Oops: I actually cut my strip on the straight grain by accident, but it worked fine.)

With right sides together, fold the rectangle in half lengthwise. Using the presser foot on your machine as a guide and stick about 1/4 inch (6mm) from the fold.

 

Trim away the seam allowance and turn right side out and then press.

Make a loop out of the turned strip. Test to be sure the button can easily pass through the loop. Remember the loop needs to be big enough for the button to slip in and out of once it is sewn to the coat.

Baste the loop in place at the bottom point of the band on the wearer’s right side of the coat, matching the 1/2-inch (13mm) seam allowance.

Even thought the right side of the coat is facing up, the loop is sewn to the wrong side of the coat edge as seen below. The edge is simply turned back out to make stitching easier in the machine.

 That's it for the collar and button loop closure. We will finish up the 503 Poiret Cocoon Coat in the Day Three of the Sew Along coming soon. Have your lining ready if you are using one. If not, have a plan on how you want to finish the coat edges with either a simple turned edge or a bound edge. Please do not shy away from adding a lining, because it is not as hard as you might think!

Join in to learn how to add the lining, add a decorative (or not) ribbon trim to the hem edge, and add a length of chain to weight the hem. Plus, how to hem the sleeves, add the button to complete the loop closure, or add frog closure. The Folkwear 503 Poiret Cocoon Coat is a great piece for learning simple yet beautiful finishing techniques to apply to lots of future projects!

If you don't already have your pattern for this stunning coat, it not too late. It will be on sale until the end of October as a paper pattern or pdf.

Remember that Folkwear's sew alongs and how-to's are always free and accessible on our website, making it easy and convenient to get started any time you like. Click here to get started on Day One of the Folkwear 503 Poiret Cocoon Coat Sew Along.

 

by Cynthia Anderson

Making piping is not difficult, and piping can add lots of interest and dimension to your hand-sewn garments or homegoods.  In this blog post, I am going to show you the basics of making your own piping.  Several Folkwear garments can have piping added to them, and actually encourage sewist to do so (145 Chinese Pajamas, 242 Cowgirl Jacket,  503 Poiret Cocoon Coat, etc.).  I hope you will be inspired to try it after reading this post, or if you have, that you may pick up a tip or two.  

What you need for making your own piping:

• Bias binding.  Steps to make your own are below.  Bias binding width will depend on your project. Commercially produced bias binding comes in different sizes typically ranging from 1/2-inch (13mm) to 5 1/2-inches (13cm). You can make or use bias tape any size you like depending on your project. You typically want bias binding (when folded in half) to be equal to or slightly less than the width of the seam allowance being used. 
• Cording.  Cording comes in varying sizes in diameter ranging from 2mm (size 00), 3mm (size 1), 4mm (size 2), 5mm (size 3), 6mm (size 4), 7mm (size 5), and 8mm (size 6). The mm refers to the approximate finished size of the cord once it is covered in fabric. Of, course the final diameter of the piping depends on the weight or thickness of the fabric being used. For this reason the cording diameter measures slightly less than the measurement it is labeled.  Don't let this confuse you, purchase cording according to the proportion of your project. Use narrow cording for finer projects; thicker cording for bulkier projects. Most cording used for clothing is made of a twisted rope of soft cotton. The soft twist makes the piping more pliable to work with.

Making your own piping is not hard, but you do need to calculate how much your project requires. Believe me when I say there is nothing more frustrating than taking time to make piping and then not have enough. So, whether you make your own or use pre-made piping, be sure you have all you need plus a bit more. If making your own piping be sure to calculate and purchasing extra fabric yardage. 

Fabrics to Use for Piping
Ideally, piping should be cut on the bias, which allows for a bit of fabric stretch and give, enabling a smooth edging around curves and corners. For this reason light to mid-weight fabrics work best for garment making. If a fabric is too thick or stiff, it simply will not have a flexible “give” and will not lay nicely going around corners or curves. Heavy fabrics are used for piping on large projects like upholstery cushions. The thing to keep in mind, is application. For clothing, I particularly like to use fine cotton, linen, wool, and silk for the piping. I don't recommend using knit fabrics or fabrics that are loosely woven. My rule of thumb is to match the weight of the piping fabric to the weight of the fabric I am making the garment from. If you are unsure about what weight or fabric to use when making piping, take the time to experiment with different weights of fabrics to get an idea of how they behave.

Since a bias binding strip is the foundation for piping, have a look at Molly’s demonstration of how to make continuous bias binding or bias tape in this YouTube video.  To make piping you often need a very long strip of bias tape and this is an excellent way to make it as it all comes out as one long strip. 

Making Piping
If you used the continuous method to make bias tape you are probably all set with enough bias tape. Another way to make bias tape is to cut enough 2-inch (5cm) wide bias strips from a fabric of your choice to make the length you need, plus a tad more for extra measure.

 

If not doing the continuous bias tape method, pin and stitch the strips right sides together end to end to make one continuous strip.

Trim to the extra fabric to create clean edge and press the seams open.

With either method of making bias tape, fold the bias strip wrong side together along the length, with a long piece of the cording sandwiched in between the fold.

 

Tip: The cording should be longer than the bias tape.  Leave a bit of extra cord length at the ends of the piping until it is applied to your project to help keep the cord from pulling out.

Be sure to line up the long raw edges and pin or baste the fabric in place close to the cord. Machine baste the fold closed to help hold the cord in place and to make the final, more precise, machine stitching easier.

 

Next, using a zipper foot, which will allow you to stitch closer to the cord, stitch through both layers of the folded fabric as close to the cord as possible, but not so close as to catch the cord in the stitching.  It helps to stitch close to the cord to ensure a good alignment when adding it to the seam allowance. 

 

Tip: Use a thread color that matches the fabric or that blends in well. You don't want to have visible stitching in the piping.

You are now ready to apply your handmade piping to your sewing project!

This is day ONE

For day TWO click here. 

For day THREE click here.

To learn how to make the piping, click here

by Cynthia Anderson

Today we are starting a three-day sew along for our 503 Poriet Cocoon Coat!  This coat has a simple construction, yet it is unique and it can help to have some extra instruction and photos to show you how the coat comes together.  As well as how the details can be more easily implemented in the coat construction.

Folkwear’s 503 Poiret Cocoon Coat Pattern is one of Poiret’s most iconic designs. Poiret drew his inspiration from the theatre and Eastern Asian culture to create a coat that is just as much a show stopper today as it was in the early 1900’s. Poiret understood the French Public’s desire to see and to be seen as part of the new avant garde, whether at the theatre, a cultural event, or art galley exhibition. Poiret saw his clothing designs as an extension of the wearer’s experience, allowing them to be part of the drama and to participate in the spectacle of being seen. We may owe “Red Carpet” phenomenon to Poiret!
Check out the How Poiret Made History and the Cocoon Coat blog to learn more.

 

Poiret brilliantly introduced all his designs in the most luxurious and beautiful fabrics of the day, using radical and exuberant attention-getting color combinations. He was not afraid of pairing clashing and bold colors, which only added to the excitement that embodied his bold new approach.

Poiret’s use of layering details also added to his unique aesthetic. He used embroidery, beadwork, appliqué, avant garde painting techniques, and even the more crude aesthetic of stenciling on fabric. Fur trim was often used in radical ways, as in the Lamp Shade Dress. This level of innovation set his reputation as an artist, encouraging Poiret to crown himself the King of Fashion. His willingness to push boundaries seemed to elevate each new design to a wearable work of art.

To help you make the Folkwear 503 Poiret Cocoon Coat even easier, it’s construction is broken down here into three easy to follow sewing days. None of this is difficult, but it is always fun to have a bit of help and learn a few tips along the way.

The Sew Along Schedule:

Day One: The first blog is is simply to help inspire you, provide suggestions on fabrics to use, and getting started with the basic layout and construction. You can make a lining too.

Day Two: How to add the neck band and optional pipping.

Day Three: How to finish the coat by adding the lining, adding the optional decorative ribbon, hemming the sleeves, and adding a finishing closure touch.

 

Sizing
First, see the size chart below (or linked) to determine your correct size and the yardage that corresponds to your size. Take note that there is quiet a bit of ease built into the pattern, allowing it will fit larger sizes than the pattern indicates.

Use the "Lengthen and Shorten" line if you need to adjust the length. See the “Fitting Your Pattern” in the instructions inside the pattern for more details.

Choosing Fabrics
The same fabrics that made the Cocoon Coat such a head turner when it first introduced, are still excellent choices today. Poiret understood the dramatic effect of using velvet and silk to not only create a sense of enveloping luxury, but in how beautifully these fabrics made the light dance making the wearer appear illuminated. You can make the coat using a double layer of differing silk weights or a combination of velvet with a silk lining for a truly decadent coat or robe. For best draping results mix any combinations of medium to heavy-weight fabrics such as velvet, silks, rayon, or jersey. Typically, use a heavier weight fabric for the coat and a lighter weight for the lining. Have fun and use different textures and colors combinations for outer coat fabric and lining fabrics for stunning results.

Fabrics like Polar Fleece would make a unique and fun garment for lounging about or giving an outdoor activity a new twist. Just imagine wearing a cocoon coat made of polar fleece and lined with silk to a football game or socializing around an outdoor fire pit with your friends and neighbors. Rip-stop-nylon would turn the Cocoon Coat into a unique windbreaker or beach cover up.

Any fabric that has a nice drape is an excellent choice. Besides the usual offering in cotton, wool, and linen, consider fabrics like a soft corduroy in a cotton blended. Look for cozy cotton and wool blend flannels. Silk/cotton organdy or a gauzy open weave fabric to make a truly unique cover-up for warmer weather, especially if you leave it unlined.

Follow in Poiret’s footsteps by using the Folkwear 503 Poiret Cocoon Coat Pattern to show off your skills in embroidery, quilting, dyeing, appliqué, or hand painting. Or use Pre-embroidered fabrics, metallic fabric, and quilted fabrics.  This coat makes the perfect canvas for making your own wearable work of art and honoring the creative genius that inspired fashion history.

Note that fabric less than 45-inches (114 cm) wide will not work for this pattern because the pattern pieces are too large to fit on smaller width fabric. Just keep this in mind when choosing a fabric.

Getting Started

To get started in making your own 503 Poiret Cocoon Coat you will need:

• Fabric determined by the size you require.
• Lining Fabric 
• Thread
• Light-Weight Woven Interfacing
• Fabric for Piping or pre-made piping (optional)
• Decorative Ribbon to finish inside edge of coat (optional)
• Chain to Weight Hem (optional)
• One Decorative Button or Frog Closure
• And the 503 Poiret Cocoon Pattern

For this sew along, I will be using silk duponi as the coat body fabric, a cotton/linen sheer woven fabric for the lining, and a striped cotton/rayon velvet for the collar.

Note: I like to use the selvage when possible, especially when using a delicate fabric. For this coat I am using the selvage of the fabric to help create a sturdier center back.

 

The Basic Construction
The Cocoon Coat is deceptively simple to make, but it is help to be familiar with the layout and construction before getting started. The main body is comprised of two pieces cut from Coat Body A. Pattern Piece A includes portions of both the front and the back of the coat. It helps to know there are no side seams in this coat design, instead the two Coat Body A pieces are stitched together at the center back seam. The sleeves are created by folding them in half and sewing up the seam. The front pieces overlap equally to create a simple balanced closure. 

Cutting the Pattern and Fabric

You will need a large area to lay out the fabric and pattern for cutting - a large table or the floor.

Helpful Hints
To avoid disappointment please read the information below before cutting the fabric out.

• Follow the pattern instructions for laying out the pattern pieces. Be sure when cutting out your fabric, that you place the pattern pieces on the right side of the fabric.
  
  
• Fabric less than 45-inches (114 cm) wide will not work for this pattern.

• Due to the size of the Coat Body A pattern piece, you may need to clear a bit of floor space, if you do not have a large table top.

• Cut two of each pattern pieces Coat Body A and Neck Band B on a single (unfolded) layer of fabric as shown in the layouts in the instructions. Remember to flip one of the pieces for Coat Body A and Neck Band B creating pieces that are a mirror image of each other as seen in the layout instructions.

• If using a delicate fabric such as silk, use an ironing cloth made of silk organza to prevent damaging the fabric. If using velvet fabric avoid pressing with an iron and use your fingers to prevent crushing the nap and scaring the velvet.

Laying Out Fabric With a Directional Considerations
If you are using a fabric with a directional nap like velvet or corduroy, be sure that both pattern pieces are laying on the fabric in the same direction. Note: If one of the pieces is flipped up-side-down then the nap will go in opposite directions on each side which will look odd.

If using a fabric with a large directional (printed or woven) repeat design you will likely need more fabric to allow you to match the design. Due to this particular coat design, you should try to match the pattern at the back seam.  And honestly, you could cut the coat without a back seam if you have fabric that is wide enough.  You may also find it helpful if to trace two copies of pattern piece Coat Body A. Having two pieces to work with will help take the guess work out of matching the pattern design of the fabric or aligning the pattern.

For help in understanding how to matching large repeat design patterns… See the blog: Helpful Hints in Making the 122 Folkwear Hong Kong Cheongsam.

 

Cut fabric for main body of the coat, lining of the coat, and collar.  Be sure to transfer all pattern markings from the pattern to the fabric with temporary markings or tailor's tacks.

 

STEP ONE: Coat Body

Note: You will use the same Coat Body pattern piece for the main coat as for the lining, and repeating the same steps are below. I am going to make a lining, but will resist providing photos since I would simply be repeating the process.

Darts
Start by making the darts at the neck of the coat. Transfer the lines, dots, and circle provided on the pattern to the wrong side of the pattern piece of the Coat Body.

Working on the wrong side of the fabric, fold the fabric so the lines match. Use pins to align and match the lines and to hold the fabric securely in place. At the neck edge of the Coat Body A, start the stitching at the dot with a backstitch, continue stitching using the line as a guide, ending at the circle point with a long thread tail. Tie off the thread tail with three knots.

 

Press the dart away from the center back.

Center Back Seam
With right sides together, pin and stitch the coat bodies together along the Center Back seam, matching notches 1 and 2.

Press the seam open. Notice the selvage was used to create strength in the center back seam.

Repeat for lining.

 

Sleeves
Fold the sleeve in half lengthwise (perpendicular to the sleeve hem). Stitch the sleeve seam, matching notches 3 and 4. Clip the curves and press the seam open.

Repeat on opposite sleeve.

Repeat for lining.

I hope you have enjoyed the easiness of the construction of the 503 Poiret Cocoon Coat so far. 

In the next Sew Along blog we will cover how to make the collar and learn how to add the optional pipping, plus a few more tips and hints.

FYI: The Folkwear 503 Poiret Cocoon Coat Pattern and PDF are both on sale until Oct. 31. Thanks and see you again soon!

 

Our 143 Japanese Michiyuki pattern is a versatile and elegant piece that can be styled for a variety of functions. Cottons for a light windbreaker or beautiful smock, flannels for a warmer jacket, and silks for a smooth evening coat are all great choices for constructing this piece. Here are some suggestions we've curated for exciting takes on this beautiful pattern, as well as some information on sourcing and choosing Japanese silks for a more authentic garment.

According to Hanami: Mai's Blog, Michiyuki are more of a protective, traditional garment. Like a coat to be worn over the kimono, their function is predominantly for warmth and to keep clothing from getting damaged. Because of their utility, Michiyuki tend to be subdued in their coloring and simple in patterning, which also would make them easier to coordinate with multiple different ensembles. However, I feel this garment has the potential to be styled in a way that is more statement-piece friendly, and have chosen some fun fabrics to explore that avenue.

To start, we have this subtly adorable cotton dobby fabric from Hart's Fabrics that blends traditional and modern in its patterning. The wave/scale pattern is a mainstay of Japanese aesthetics, but the twist is this one includes cats in it. I can't get over it, it's too cute.

 

Next, also from Hart's Fabrics, is a tasteful Autumn stripe fabric. This cotton flannel would make for a cozy and warm jacket.

 

Bolt's Fabric Boutique has a precious floral gingham print that would make for an adorable Michiyuki with a slightly playful edge.

 

 Also, making the Michiyuki out of rainwear fabric would make a really beautiful and unique raincoat.  This navy rainwear, cotton with latex backing, from Marcy Tilton would be very nice, especially paired with some stand-out buttons.

 

Finally, for a more traditional route, you could look to source authentic Japanese kimono silk. Luckily, there is an abundance of deadstock or otherwise unsewn kimono fabric to be found online. Places like Ebay and Etsy are good choices, though a bit transient in their offerings. A couple keywords to be aware of in your search: You would find good results searching for Chirimen, or Rinzu silks. Both are types of silk that are different, but appropriate for use in this application. Additionally, be careful not to buy fabric that is intended for the obi. An obi is the waist sash that is tied around the kimono, and will be too thick for sewing a Michiyuki. You can get a sense of obi fabric if it is thick, has a lot of embroidery or metallic threads, and looks like it is designed to sit sideways with its motifs.

That said, here is an authentic kimono silk bolt from ebay with several yards available that would be perfect for a Michiyuki or other Japanese garment. Since kimono fabrics are regularly singular bolts, be sure to check with the seller or the listing to make sure it will have enough yardage for what you need. 

 

 

 

 

If you are taken with the flair in which Phryne Fisher wears the glamorous coats in the PBS series Ms. Fisher’s Murder Mysteries, or relished in the flamboyant entrance of Shirley MacLaine’s character Martha Levinson in Downton Abbey, then you owe your adoration to Paul Poiret. If you dream of possessing a Cocoon Coat of your own, then Folkwear has the pattern to make your dreams come true. To best appreciate the Folkwear 503 Poiret Cocoon Coat one can not separate it from the extraordinary man that designed it and the time in which he lived.

The extravagance of the Belle Epoch or The Beautiful Age would give way to one man’s radical vision of the modern world, enabling him to distill and reflect back the desires and ethos of a new modernity. For the first time women were given the opportunity to dress according to how they saw themselves, forever changing fashion. While Worth was credited for founding haute couture, Poiret (1879-1944) is recognized for completely transforming it, crowning him the first “modern” designer. Paul Poiret revolutionized women’s fashion, dismantling six-hundred years of how women in Europe wore clothing. Except for a brief Classical Grecian influenced moment during the French Revolution, the female body was divided into two separate halves, like an hourglass. Poiret was frustrated with the lack of creativity in how women dressed and set out to change things.

Many of Poiret’s ideas came from his observations as French society’s became more restless for change. Paul Poiret ushered in many firsts that were a culmination of his multifaceted view of what modern life should look like. Many of his revolutionary ideas continue to to shape our ideas today. Poiret cultivated an aesthetic that was expressed through not only the clothing he designed, but through his recognition that fashion was a natural continuation of a life-style. He designed not only clothing, but furniture, textiles, interiors, and fragrances. He made headlines for the legendary parties he threw and in the way he traveled around the world to showcase his collections. Poiret compared his work with the work of Picasso and counted among his friends and sometime collaborators numerous artists of the period. He was inspired by the the Ballet Russe and collaborated with Sergei Diaghilev. The Fauvist painter Francis Picabia was a good friend and the two shared a love of bright colors and bold pattern. Modern art in all its forms would remain a driving force in inspiring Poiret’s work.

At the turn of the century, the world was changing quickly and Paul Poiret was eager to make his mark. He drew his influences from every corner of the globe. His desire was to create a new vision of modernity, which encompassed freeing silhouettes to reflect new attitudes. He relied on drama and spectacle to catch the attention of Parisian society. A Classical Grecian dress designed for Isadora Duncan created a frenzy for the Ancient Greece silhouette that the designer is best known for. He introduced a pants derived from a costume worn by Egyptian dancers girls that shockingly exposed women’s legs (think Sybil’s Harem pants in Downton Abbey). The rage for everything Asian-inspired was in part fueled by Poiret’s theatrical geisha kimonos. 

Unfortunately, Poiret failed to acknowledge these influences let alone give credit where credit was due. He took inspiration from other cultures, molded them to his extraordinary vision, never acknowledging their origins.

One of the most distinguishable designs was the Lampshade dress which was paired with the infamous Hobble Skirt. The exuberant costumes and productions of the Ballet Russe not only inspired the designer, but he would use the stage in a brilliant marketing scheme to reveal his own designs to the French public. He even used his own wife Denise Boulet as a model, catapulting an ordinary young woman into a celebrity muse.

“My wife is the inspiration for all my creations; she is the expression of all my ideals. She was to become one of the queens of Paris”

Poiret’s vision for the modern woman did not include the constraints of the corset. While he is often credited with freeing women of the corset, it was actually, Madame Vionnet (an early mentor of Poiret) who first abandoned the rigid structure of the corseted figure. Poiret was patient with society's hesitancy to completely discard the corset. He let the recommendations by doctors over medical concerns and the principles of the Suffragettes help to pave to way. Poiret did claim to be the inventor of the brassière. He explained that his designs celebrated the freedom from structured undergarments. This brassière was made of a thin band of fine cotton or silk that covered the bust and was held in place by narrow shoulder straps. Fashionable women took to the new comfortable physical sensation without much hesitation. Poiret gave women permission to free themselves from corsets while being mindful to provide them with a little something to help maintain their respectability. It would appear Poiret was calculating in how he unveiled his visionary ideas, being careful to not upset the applecart all at once.

Poiret was frustrated with how he saw fashionable women’s clothing relegated them into living dolls. He intend to upend this feminine ideal with his own vision. Poiret would replace tedious pattern construction with new silhouettes derived from draping techniques. Poiret’s designs were revolutionary in their complete abandonment from the rigid and highly sculpted bodices and nipped waists that had confined women’s bodies for hundreds of years. He shifted the focus of the female figure away from the waistline to a long, lean line, beginning at the shoulders and ending in a narrow hem at the ankle. Poiret’s fluid and sensual designs were intended to free women and as he explained,

“I like a plain gown, cut from light and supple fabric, which falls like thick liquid, just touching the outline of the figure and throwing shadows and light over the moving form.”

The designer was not without a contradictory misstep, taking the sleek silhouette to an absurd extreme with the design of the Hobble skirt. The skirt was so tight from the knees to the ankles that sometimes the legs had to be taped together to prevent splitting the skirt while attempting to walk. Poiret himself commented that he had “freed the breasts but shackled the legs”. A torrent of outraged protests from the press and a Papal condemnation led to slit skirts, buttoned hems, and pleats that allowed for mobility. Despite or maybe because of the uproar, the narrow silhouette was here to stay.

The basic shapes of Poiret’s designs are fairly simple. He was not revered for his construction techniques, proving you do not have to be an engineering genius to produce amazing results. His real genius is revealed in his daring and extravagant use of color and stunning fabrics. He favored the bright, unrestrained palette of the Fauves and fabrics of rich brocade, velvet, and silk embellished with opulent trimmings and furs.

The Folkwear 503 Poiret Coccon Coat, from around 1913, is the perfect example of a very simple design that coveys opulence through drape, shape, and of course, the choice of fabric and trim. The coat incorporates the signature long, unbroken line from the shoulders to the narrow, ankle-length hem while draping in deep, voluminous swags in the back. Its influences are clearly Eastern and yet its look is definitely modern.

Perhaps Poiret’s most lasting influence was in his understanding of the power clothes hold over human desires. He concocted a potion made of cloth and dreams that would lure women into a web of consumerism that has motivated the world ever since.

Designers continue to look to Poiret’s vision for inspiration and his legendary impact has been hard to match. One other showman-designer has dared to try. John Galliano's 1998 Spring Collection fashion show for Christian Dior, held at the Paris’s Opera Garnier, created an intoxicating extravaganza to rival Poriet. While, Galliano's muse for the collection was The Marchesa Casati, is could also be a tribute to Paul Pioret. Below is Galliano's take on the Cocoon Coat, proving Poiret's magic still has the ability to mezmerize and intrigue us still.

Let one man's vision inspire you to make and enjoy your own legendary Folkwear 503 Poiet Cocoon Coat. The printed pattern and pdf version are both  on sale throughout the month of October... just in time for cozy couch lounging or a special upcoming holiday occasion. Keep watching for a two part Sew-along blog that will solve the mystery of making your own Ms. Fisher fantasy Coat!

 

By Victoria Watkins

Learning about how embroidery has varied across cultures and historical eras is one of the exciting benefits of developing as a sewist. Throughout our catalog, Folkwear includes many variations of folk and historical embroidery, and our 209 Walking Skirt motif includes one example. I find that I am a person who learns best by doing, and working on this motif has given me a chance to accumulate a little bit of experience in the realm of hand embroidery.

To those new to embroidery, or looking for a refresher on how to transfer the patterns to your fabric, you may want to take a look at our previous blog that demonstrates different methods for transferring your embroidery motifs. Once your design is transferred, you're ready to begin embroidering.

Admittedly, this process was a learning experience for me. It also gave me a deeper appreciation for the accomplished embroiderers of the past, as well as reminded me that sometimes instructions can be flexible guidelines as opposed to unchangeable law. One area I found this to be the case was the first step, in which the directions say to embroider a running stitch a small distance around the marked circles of the motif. Personally, I found it easier to create clean and appealing work once I started experimenting without using this running stitch. Others certainly would find it useful to use them as directed. 

The main stitch used for this pattern is a buttonhole stitch, which effectively creates a knot around the edge of the fabric. This in turn allows us to cut out the centers of the ovals and circles, giving us handmade eyelets. I found the most attractive success in pulling the thread tail up toward the center of the circle to tighten the knot, then pulling it back down toward the outside. This seemed to arrange the knots in a way that created a unified and tidy edge.

Once the round was complete, I drew the thread to the back of the work and slipped it behind a couple of the previous stitches, then clipped. This is another point in which I deviated a little from the instructions. They suggest taking tiny stitches to hop from circle to circle so you don't have to cut the thread each time. However, because the brown of the thread was so distinct from the yellow linen, I decided not to do this. If the colors are closer together, I could imagine this being a great way to avoid hassle.

At this stage, it's time to cut out the center, which is a bit nerve-wracking! However, if you've made a tight and consistent circle of buttonhole stitches, you'll find that this is not as terrifying as it initially seems. 

It can be a little awkward trying to get scissors down into the taut fabric, so I found that first piercing it with a seam ripper was an effective solution. The instructions also suggest using something like a tailor's awl to this effect. After gently creating a small tear with the ripper, I cleaned up the edges with scissors. This is a step in which it pays to be patient and steady. If you clip too closely to the embroidery thread, you may undo your work and find the entire thing unraveling. However, if you don't clip closely enough, the eyelet is a little ragged on the interior. Of course, this particular example is very stark due to the high contrast between the color of the thread and the fabric base. During this part of the process, I imagined that embroidery that uses matching fabric and thread colors could result in a gorgeous, impressive piece that hides some of the roughness that sometimes characterizes handmade work.

Speaking of roughness, these photos do show the evidence of my initial attempts at this method. While it is a bit vulnerable to show the first shaky steps into a new skill, I hope it also demonstrates something that is part of the reason we are drawn to sewing in the first place. Sewing is a way to expand our capacity for self expression and creativity, and if we don't take the first steps into a new skill without a bold ineptitude, we'll never have anything to show for it. Now after being prompted to tackle this motif as a demonstration, I'm interested in playing around with embroidery at home for personal projects! 

 

If you'd like to play with the embroidery motif featured in this blog post, as well as sew your own Walking Skirt, it's available in both our paper and PDF pattern formats. And the instructions for this embroidery technique are included in the pattern!

Have you dipped your toes into any new techniques lately? We'd love to hear about any learning experiences you've had! 

 

Also, if you want to watch a video of me demonstrating this technique, it is on our YouTube channel (and below).

 

 

 

by Cynthia Anderson

In Buttonhole 101: Part One, the basics about buttons and buttonholes was covered. In Part Two we will learn how the relationship between the partners really works.

Once you understand the particulars about buttons and buttonholes, the trick is to understand how to place them so they work together as they should. Once you master the placement, then your machine is left to do all the work.

How Button Size and Buttonhole Placement Relate

Patterns are designed with a specific button size and buttonhole placement in mind. This affects fit and proportion. This is important because it also establishes the center front of a garment.  You do not want to tamper with the location of the center front.

Using a Different Size Button?
That is not to say that you can not use a different size button than the size designated on the pattern. Selecting a button that is 1/4-inch (6mm) larger or smaller is generally not a problem. However, there will be times when you will want more flexibility when it comes to button size. This adjustment can be applied to sizing a button up or down.

If the size of the button you want to use exceeds the 1/4-inch (6mm) size increase or decrease rule, then adjustments will need to be made to the pattern by increasing or decreasing the finished edge. This adjustment is easy, but needs to be made before you cut out the fabric. A correct adjustment is important because it will maintain the proper fit and proportion of the garment.

Note: Remember if making a woman's blouse the buttons go on the LEFT side as you wear it, which is the side that will be adjusted.

Once you understand the correct proportion between the width of the button, the center front placement of the button, and the edge of the garment it will all make sense. Remember the pattern has been designed to correctly fit a specific size. If you use the pattern required for your size as it is, but decide to use a dramatically different size button than the one suggested on the pattern, two mishaps will happen.

For example: The the pattern calls for a 1-inch (2.5cm) button, but you want to use a 1/2-inch (13mm) button instead. Since the pattern was designed for a 1-inch (2.5cm) button the following mishaps will happen.

Mishap #1:
If you place the button on the center front line like you know you should, then the amount of fabric that extends beyond the button edge will grow from the correct 1/2-inch (13mm) to an incorrect 3/4-inch (19mm). While this might not seem like a large increase, it is. When working with small proportions they add up. In this case it would look strange and like a mistake to have too much fabric extending beyond the button edge. See the illustration below.

 

Mishap #2:
It is not a good idea to move the button 1/4-inch (6mm) closer to the edge to compensate for the extra 1/4-inch (6mm) of extra fabric width. This creates more problems, because now you have moved off the center front. Not only have the buttons moved 1/4-inch (6mm) off the center, but the size is now off. The circumference of the garment has increased a total of 1/2-inch (13mm). Making an increase of 1/4-inch (6mm) on both the left and right sides of the blouse. See the illustration below.

The Correct Thing to Do
In order to use a 1/2-inch (13mm) button the edge of the pattern needs to be adjusted correctly. The is easy, if you follow the rules.

Rule One: Buttons should ALWAYS be placed on the center line whether on the front or back of a garment. This insures garment will fit correctly when it is fastened and the buttons align down the center front. Otherwise, symmetry and fit are off.

To illustrate, lets just hypothetically say that the front garment edge is actually the center front of the garment. If the button is placed correctly on the center front, then this would cause the button to barely have any room to sit and would hang off the edge. We know this does not work and looks unfortunate.

To prevent this from happening, extra fabric is added to the edge. Patterns are always drafted with for a specific button width. The pattern we started with was drafted for a 1-inch (2.5cm) button. But we want to use a 1/2-inch (13mm) button. No worries, forget about the pattern being drafted to use a specific size button and focus on the center line.

Note: This adjustment works for sizing up as well as down.

Ok, we need for the button to not hang off the edge. But since the button is already sitting on the center line, all we need to do is add more fabric to the edge. But how much?

Second Rule: Ideal Proportion Rule: The amount of fabric that extends beyond the edge of the button should be equal to the half of buttons width. It is easy... add the width of the button to the center line to extend the edge of pattern. 

This should leave a fabric extension half the width of the button. In this case 1/4-inch (6mm) is visible beyond the button edge. See the illustration Below.

 

When the garment is fastened, the amount of fabric that extends beyond the button should be half the width of the button as well. For example if a 1/2-inch (13mm) button is sitting on the center front line, the the edge of the fabric should extend 1/4-inch (6mm) from the edge of the button.

 

Now that the edge extension on the left side has been added correctly, the same extension adjustment of adding the width of the button to the center line needs to be made to the right side. Remember the buttonholes go on the right side. Next, you need to draw out the buttonhole length in the correct position on the right side of the garment.

We already know that the buttonhole length equals the width of the button plus 1/8-inch (3mm).

In this case the length of our buttonhole is 5/8-inch (16mm).

The length of the horizontal buttonhole should extend 1/8-inch (3mm) over or beyond the center front line, toward the finished garment edge. The buttonhole should fall in the same spot as the button.

What to Know About Fabrics, Interfacing, and Stabilizers

We have cover a lot, but before you make your final buttonholes lets look closer at the variables of using different fabrics and get some tips to making a successful buttonhole on any fabric.

Fabrics

All fabrics differ in the way they behave, which is something you should be prepared for when making buttonholes. Fabrics can be thick, thin, or somewhere in-between; loose or tightly woven; light and airy, stiff, drapey, slippery, or stretchy. Some fabrics are stable which means they do not give, stretch, or contort out of shape. Until you become proficient with making buttonholes stick with stable woven fabrics. They are the easiest to work with and are generally thought to yield favorable results. 

However, that is not to dissuade you from working with any fabric you like. Just about any fabric can be made easier to work with using a stabilizer and interfacing.

Interfacing
Interfacing is an additional permanent layer of strengthening material that is sandwiched between two layers of fabric to provide strength. This keeps the fabric from stretching, twisting, and puckering during sewing and adds lasting strength. Areas that include buttons and buttonholes greatly benefit from interfacing for all these reasons. Interfacing is either sew-in or fusible (iron on).
Fusible interfacing can have adhesive on one or both sides. Sew-in and fusible interfacing comes as woven and non-woven versions. They also comes in different weights.

Choose an interfacing weight that comes close to or is slightly lighter than the fabric of your project. Typically, you do not want an interfacing that is heavier than your fabric. The interfacing becomes part of your project and the idea is to give the fabric extra strength, not to change it’s stiffness too much. You can also substitute other fabrics such as muslin, batiste, organza, depending on the extra weight of you need.

Note: Some interfacing need to be pre-washed. Be sure to check when purchasing.

Tip: If your fusible interfacing is crinkled do not iron it. This does not work. You will end up fusing it to your ironing board or to the bottom of your iron. Non-fusible interfacing iron just fine.

Stabilizers
Extra stability often makes sewing easier, especially when it comes to fine stitching, like making buttonholes or machine stitched embroidery. Stabilizers are added to the outside of your fabric to help make it more stable when machine sewing.  After the stitching is complete, the stabilizer is then removed. This works well when a fabric is fine, delicate, stretchy, slippery, thick, or has a pile. Stabilizers come as tear-away and even come as water soluble, allowing the stabilizer to dissolve when wet.

Typically stabilizers are added to the underside of your project, but sometimes it is added to the topside as well. Tissue paper, Swedish Tracing paper, and regular paper can be used a well. Experiment to see what your project needs.

The Final Buttonholes

Draw out the placement of the buttons on the left side if making a woman's blouse (as you wear it). And draw out the placement of the buttonholes on the right side (as you wear it).

The placement of the button is determined first, then the buttonhole is place on the center horizontal line of the button. The buttons and buttonholes should align as in the illustration below.

 

Note: Check the owners manual to see if the bobbin thread needs to be threaded through the hole in the finger of the bobbin. This extra step can make all the difference in the thread tension when making buttonholes.

Make one final buttonhole test if you feel you need to. All that is left is to sew your buttonholes!

Once the buttonholes are made clean up any stray threads by either trimming them away or thread the tails to a needle and pull through to the underneath side of the buttonhole, then tie off. You are almost done.

Cutting Open the Buttonhole

You did it! Now the buttons need to be added, but first the buttonholes must be cut open. Taking care to not cut into the stitching of the buttonhole is important. The idea is to only cut the fabric slit between the thread beads and tacks.

Tip: Before cutting... Use Fray Check.

Fray Check is a liquid seam sealant that works beautifully to prevent the cut fabric from fraying and keeps threads tidy. Apply the sealant to the entire button hole front and back, or just one side.

Some sewist only apply the sealant to the fabric area that is to be cut using a toothpick. Either apply the sealant before of after cutting the buttonhole open. Be sure to let it dry before cutting if you apply before cutting.

Tip: Be sure to test the Fray Check on a sample buttonhole to be sure the color of the thread and fabric do not bleed. Always allow the sealant to completely dry.

Cutting Tools
There are several different tools for cutting buttonholes and it is worth experimenting to see what you feel the most comfortable using.

• A Buttonhole Cutter is more like a chisel and they come in different sizes. Place the buttonhole to be cut over a designated cutting surface. A cutting mat or small block of wood works well. Place the chisel cutter in the buttonhole and carefully rock the cutter back and forth to create a clean cut. Or slightly hit the cutter end with a rubber hammer to splice the fabric, using one or two strikes.

• A Seam Ripper will only make a clean cut if it is sharp. Pierce the fabric into the center of the buttonhole using the sword-like end, then cut the hole using the u-shaped blade. Definitely use a straight pin to avoid cutting through the bartack at the end of your buttonhole. Because you have less control over the seam ripper than a pair of scissors it is more likely you will cut through the bartack unless you are very careful.

• To use Small Scissors, fold the buttonhole in half and make a tiny snip through the center of the fold. Insert the tip of the scissors into the slit and trim from the center to one edge of the buttonhole. Then cut to the opposite edge. 

Tip: Use straight pins placed on the inside of the tack edge to prevent cutting into or past the stitching.

Hint: If you make more than a small cut using scissors, be sure the half foldline matches up perfectly or you may make an unfortunate cut.

Note: If despite your best efforts, if you still end up with a buttonhole longer than needed or if you decide to use a smaller button, simply cut the buttonhole opening slightly smaller. Back off from cutting right up to the tacks. 

 

Sewing The Buttons On

Now comes the final anticipated touch... adding the buttons! Hopefully, you now have a solid understanding and can implement everything offered in this blog to insure buttonhole success. If everything went correctly, then all you have to do is sew the buttons where you diligently placed them on the center line.

If you need a refresher on how to sew on flat or shank buttons refer back to the Buttonholes 101: Part one.

It may seem like a lot of information just to make a buttonhole, but that's because details add up for successful results. Learning how to correctly execute buttons and buttonholes will enable you to sew them with confidence and ease no matter the project. It is not uncommon for sewists to sew for years, "winging" their buttonholes. Only after making copious amounts of buttonholes does something finally click... and it all makes sense. It is never too late to master buttonholes or learn new tricks and tips!